Tag: <span>machine</span>

 

Technical Specification

Weight	2 Tons(approx)
Rate of Production	270 bricks per hour
Crew	1 semi skilled & 7 unskilled labour
Power consumption	15 KW per hour (maximum)
Manufacturing time	90 days from placement of supply order.
Erection and commission	2 days
Training	3 days

Components

Mixing Machine	Conveyor Unit	Brick press
a. Capacity – 450 litres	a. Length: 6 mtrs	a. Three cylinder Hydraulic Power pack of 100 ltr with 7.5 HP 4 Pole ABB motor
b. RPM: 30	b. Width: 450 mm	b. Hydraulically operated trolley with 1 HP ELECON gear motor.
c. Motor: 7.5 HP 4 Pole ABB Motor with Starter	c. Speed: 150 mtr / min	c. Mechanical Vibrator with 5HP 4 pole ABB motor.
d. Gear Box: 6” FV 20:1 ELECON / SHANTHI	d. Motor: 3 HP 4 Pole ABB Motor	d. Complete Electrical panel
		e. 1000 litres Hopper
		f. Stainless Steel Mould with three moulds.

Do's & Dont's

Mixing Machine	Brick Press
a. Do not start the mixing machine in full load	a. Clean mould box daily.
b. Incase of a power failure remove 75% of the material before restarting.	b. Check height of the brick during the starting of the shift and periodically thereafter.
c. Clean the arms and the pan daily after use.	c. Check all nuts and bolts of the vibrator daily.
d. Spare scrapper are provided with the machine. They can be replace with ease by removing the nuts.	d. DO NOT leave any material inside the hopper, trolley or mould box before closing down the day.
e. Gear Oil level to be monitored once a week	e. Do not start the power pack motor before filling the oil (Hydraulic oil system 68) to 85% of its capacity.