
Weight | 1 Ton (approx) |
---|---|
Rate of Production | 250 plain bricks per hour |
Crew | 1 Semi Skilled & 5 unskilled labour |
Power consumption | 5 KW per hour (maximum) |
Manufacturing time | 30 days from placement of supply order |
Erection and commission | 1 day |
Training | 1 day |
Mixing Machine | Brick Press |
---|---|
a. Capacity – 150 litres | a. Single cylinder Hydraulic power pack of 100ltr with 5 HP 4 Pole ABB motor |
b. RPM: 30 | b. Steel Mould Box with two moulds |
c. Motor: 3 HP 4 Pole ABB Motor with Starter | |
d. Gear Box: 3” FV 20:1 ELECON / SHANTHI |
Accessories
1. Interlocking bricks of size 300mm x 150mm x 100mm.
2. Interlocking bricks of size 300mm x 100mm x 100mm.
Weight | 3 Tons(approx) |
---|---|
Rate of Production | 1000-1200 bricks per hour |
Crew | 1 semi skilled & 7 unskilled labour |
Power consumption | 30 KW per hour (maximum) |
Manufacturing time | 45 days from placement of supply order |
Erection and commission | 2 days |
Training | 3 days |
Mixing Machine | Brick Press |
---|---|
a. capacity – 600litres | a. Double cylinder Hyrdraulic power pack of 100 ltr with 15HP 4 Pole ABB motor. |
b. RPM – 30 | b. PLC controlled circuit. No human intervention upto ejection stage. |
c. Motor – 20 HP 4 Pole ABB motor | |
d. Gear Box – 8” FV 40:1 ELECON / SHANTHI |
Mixing Machine | Brick Press |
---|---|
a. Do not start the mixing machine in full load | a. Do not open the control panel without presence of competent person. |
b. Incase of a power failure remove 75% of the material before restarting. | b. PLC shall be handled only by company representatives. |
c. Clean the arms and the pan daily after use. | c. Area around the hydraulic valve should be kept clean at all times. |
d. Gear Oil level to be monitored once a week | d. Clean mould box daily after use. |
e. Do not start the power pack motor before filling the oil (hydraulic oil system 68) to 85% of its capacity. |
Weight | 160 Kg (approx) |
---|---|
Rate of Production | 40 Interlocking bricks per hour |
Crew | 3 unskilled labour |
Power consumption | Nil. It's manual machine |
Manufacturing time | 10 days from placement of supply order |
Erection and commission | Not required |
Training | 1 day |
1. Clean mould box daily after use. |
---|
2. Check height of the brick during the starting of the shift and periodically thereafter. |
3. Check all nuts and bolts of the Arm daily. |
4. DO NOT leave any material inside the mould box before closing down for the day. |
Weight | 1 Ton (approx) |
---|---|
Rate of Production | 100 Interlocking bricks per hour |
Crew | 1 Semi skilled & 5 unskilled labour |
Power consumption | 5 KW per hour (maximum) |
Manufacturing time | 30 days from placement of supply order |
Erection and commission | 1 day |
Training | 1 day |
Mixing Machine | Brick Press |
---|---|
a. Capacity – 150 litres | a. Single cylinder Hydraulic power pack of 100ltr with 5 HP 4 Pole ABB motor |
b. RPM: 30 | b. Steel Mould Box with two moulds |
c. Motor: 3 HP 4 Pole ABB Motor with Starter | |
d. Gear Box: 3” FV 20:1 ELECON / SHANTHI |
Accessories:
1. Plain bricks of size 250mm x 125mm x 75mm.
2. Plain bricks of any other dimension smaller than the above dimension.
Mixing Machine | Brick Press |
---|---|
a. Do not start the mixing machine in full load | a. Follow colour code during mould changing. |
b. Incase of a power failure remove 75% of the material before restarting. | b. The hand Operated lever of the power pack is quite sensitive. A light push is enough. Do not press hard. |
c. Clean the arms and the pan daily after use. | c. Do not start the power pack motor before filling the oil (Hydraulic oil system 68) to 85% of its capacity. |
d. Spare scrapper are provided with the machine. They can be replace with ease by removing the nuts. | |
e. Gear Oil level to be monitored once a week |
Weight | 2 Tons(approx) |
Rate of Production | 270 bricks per hour |
Crew | 1 semi skilled & 7 unskilled labour |
Power consumption | 15 KW per hour (maximum) |
Manufacturing time | 90 days from placement of supply order. |
Erection and commission | 2 days |
Training | 3 days |
Mixing Machine | Conveyor Unit | Brick press |
---|---|---|
a. Capacity – 450 litres | a. Length: 6 mtrs | a. Three cylinder Hydraulic Power pack of 100 ltr with 7.5 HP 4 Pole ABB motor |
b. RPM: 30 | b. Width: 450 mm | b. Hydraulically operated trolley with 1 HP ELECON gear motor. |
c. Motor: 7.5 HP 4 Pole ABB Motor with Starter | c. Speed: 150 mtr / min | c. Mechanical Vibrator with 5HP 4 pole ABB motor. |
d. Gear Box: 6” FV 20:1 ELECON / SHANTHI | d. Motor: 3 HP 4 Pole ABB Motor | d. Complete Electrical panel |
e. 1000 litres Hopper | ||
f. Stainless Steel Mould with three moulds. |
Mixing Machine | Brick Press |
---|---|
a. Do not start the mixing machine in full load | a. Clean mould box daily. |
b. Incase of a power failure remove 75% of the material before restarting. | b. Check height of the brick during the starting of the shift and periodically thereafter. |
c. Clean the arms and the pan daily after use. | c. Check all nuts and bolts of the vibrator daily. |
d. Spare scrapper are provided with the machine. They can be replace with ease by removing the nuts. | d. DO NOT leave any material inside the hopper, trolley or mould box before closing down the day. |
e. Gear Oil level to be monitored once a week | e. Do not start the power pack motor before filling the oil (Hydraulic oil system 68) to 85% of its capacity. |