/ By Terra Block / Interlocking Brick Machine • Products/ • • • • / 0 Comments

Hand Operated Interlocking Brick Machine

Technical specification:

Weight160 Kg (approx)
Rate of Production40 Interlocking bricks per hour
Crew3 unskilled labour
Power consumptionNil. It's manual machine
Manufacturing time10 days from placement of supply order
Erection and commissionNot required
Training1 day

Do's & Dont's

1. Clean mould box daily after use.
2. Check height of the brick during the starting of the shift and periodically thereafter.
3. Check all nuts and bolts of the Arm daily.
4. DO NOT leave any material inside the mould box before closing down for the day.
/ By Terra Block / Interlocking Brick Machine • Products/ • • / 0 Comments

Semi Automatic Interlocking Brick Machine

 

Technical Specification

Weight1 Ton (approx)
Rate of Production100 Interlocking bricks per hour
Crew1 Semi skilled & 5 unskilled labour
Power consumption5 KW per hour (maximum)
Manufacturing time30 days from placement of supply order
Erection and commission1 day
Training1 day

Components:

Mixing MachineBrick Press
a. Capacity – 150 litresa. Single cylinder Hydraulic power pack of 100ltr with 5 HP 4 Pole ABB motor
b. RPM: 30b. Steel Mould Box with two moulds
c. Motor: 3 HP 4 Pole ABB Motor with Starter
d. Gear Box: 3” FV 20:1 ELECON / SHANTHI

Accessories:

1. Plain bricks of size 250mm x 125mm x 75mm.

2. Plain bricks of any other dimension smaller than the above dimension.

Do's & Dont's

Mixing MachineBrick Press
a. Do not start the mixing machine in full loada. Follow colour code during mould changing.
b. Incase of a power failure remove 75% of the material before restarting.b. The hand Operated lever of the power pack is quite sensitive. A light push is enough. Do not press hard.
c. Clean the arms and the pan daily after use.c. Do not start the power pack motor before filling the oil (Hydraulic oil system 68) to 85% of its capacity.
d. Spare scrapper are provided with the machine. They can be replace with ease by removing the nuts.
e. Gear Oil level to be monitored once a week

/ By Terra Block / Interlocking Brick Machine • Products/ • • • / 0 Comments

Automatic Interlocking Brick Machine

 

Technical Specification

Weight2 Tons(approx)
Rate of Production270 bricks per hour
Crew1 semi skilled & 7 unskilled labour
Power consumption15 KW per hour (maximum)
Manufacturing time90 days from placement of supply order.
Erection and commission2 days
Training3 days

Components

Mixing MachineConveyor UnitBrick press
a. Capacity – 450 litresa. Length: 6 mtrsa. Three cylinder Hydraulic Power pack of 100 ltr with 7.5 HP 4 Pole ABB motor
b. RPM: 30b. Width: 450 mmb. Hydraulically operated trolley with 1 HP ELECON gear motor.
c. Motor: 7.5 HP 4 Pole ABB Motor with Starterc. Speed: 150 mtr / minc. Mechanical Vibrator with 5HP 4 pole ABB motor.
d. Gear Box: 6” FV 20:1 ELECON / SHANTHId. Motor: 3 HP 4 Pole ABB Motord. Complete Electrical panel
e. 1000 litres Hopper
f. Stainless Steel Mould with three moulds.

Do's & Dont's

Mixing MachineBrick Press
a. Do not start the mixing machine in full loada. Clean mould box daily.
b. Incase of a power failure remove 75% of the material before restarting.b. Check height of the brick during the starting of the shift and periodically thereafter.
c. Clean the arms and the pan daily after use.c. Check all nuts and bolts of the vibrator daily.
d. Spare scrapper are provided with the machine. They can be replace with ease by removing the nuts.d. DO NOT leave any material inside the hopper, trolley or mould box before closing down the day.
e. Gear Oil level to be monitored once a weeke. Do not start the power pack motor before filling the oil (Hydraulic oil system 68) to 85% of its capacity.