Automatic Interlocking Brick Machine
Technical Specification
| Weight | 2 Tons(approx) |
| Rate of Production | 270 bricks per hour |
| Crew | 1 semi skilled & 7 unskilled labour |
| Power consumption | 15 KW per hour (maximum) |
| Manufacturing time | 90 days from placement of supply order. |
| Erection and commission | 2 days |
| Training | 3 days |
Components
| Mixing Machine | Conveyor Unit | Brick press |
|---|---|---|
| a. Capacity – 450 litres | a. Length: 6 mtrs | a. Three cylinder Hydraulic Power pack of 100 ltr with 7.5 HP 4 Pole ABB motor |
| b. RPM: 30 | b. Width: 450 mm | b. Hydraulically operated trolley with 1 HP ELECON gear motor. |
| c. Motor: 7.5 HP 4 Pole ABB Motor with Starter | c. Speed: 150 mtr / min | c. Mechanical Vibrator with 5HP 4 pole ABB motor. |
| d. Gear Box: 6” FV 20:1 ELECON / SHANTHI | d. Motor: 3 HP 4 Pole ABB Motor | d. Complete Electrical panel |
| e. 1000 litres Hopper | ||
| f. Stainless Steel Mould with three moulds. |
Do's & Dont's
| Mixing Machine | Brick Press |
|---|---|
| a. Do not start the mixing machine in full load | a. Clean mould box daily. |
| b. Incase of a power failure remove 75% of the material before restarting. | b. Check height of the brick during the starting of the shift and periodically thereafter. |
| c. Clean the arms and the pan daily after use. | c. Check all nuts and bolts of the vibrator daily. |
| d. Spare scrapper are provided with the machine. They can be replace with ease by removing the nuts. | d. DO NOT leave any material inside the hopper, trolley or mould box before closing down the day. |
| e. Gear Oil level to be monitored once a week | e. Do not start the power pack motor before filling the oil (Hydraulic oil system 68) to 85% of its capacity. |
Comments for this post are closed.
